Minn Kota X10 CMSI+ VX 10-inch GPS/Fishfinder with Transom Mount Transducer [412380-1VX]

Product Introduction

The Minn Kota X10 CMSI+ VX is a 10-inch GPS/fishfinder that puts sonar, charts and your Minn Kota system on one screen. Powered by Humminbird Imaging and supplied with Minn Kota Maps, it shows Dual Spectrum CHIRP, MEGA Side Imaging+ and MEGA Down Imaging+ with the included XM-14-HW-CMSI-T transom mount transducer. Connect it to compatible Minn Kota trolling motors, Talon shallow water anchors and the Minn Kota Fishing App, and one display runs your whole fishing system.

Why This Product?

You get a high-resolution touchscreen, built-in GPS, sonar and boat-wide integration in one package, with the transom mount transducer already in the box. Draw a course on the screen with your finger, get alerts when the water gets shallow, and manage your gear from the app, so you spend less time searching and more time fishing. Add Live Sonar or radar later through the Ethernet port as your setup grows.

What Can I Use This Product For?

• Finding fish and structure fast: read Side Imaging and Down Imaging views out to the sides and below the boat, with Dual Spectrum CHIRP for 2D sonar.
• Navigating to your spot: use Draw and Navigate to draw a course with your finger and let a compatible Minn Kota trolling motor take you there.
• Controlling your whole system: operate your Minn Kota trolling motor, sonar and shallow water anchors from one display and the Minn Kota Fishing App.
• Mapping your water: record depth contours, bottom hardness and vegetation in real time with AutoChart Live.
• Protecting your equipment: use Intelligent Depth Control to get an alert on depth changes and, if needed, automatically engage Spot-Lock and deploy your shallow water anchors.
• Building a bigger system: add Live Sonar (sold separately), radar or an NMEA 2000 network.

Key Product Benefits

• 10-inch high-resolution color touchscreen with keypad control, engineered for polarized eyewear and clear viewing in rain or high sun
• Dual Spectrum CHIRP, MEGA Down Imaging+ and MEGA Side Imaging+
• Built-in GPS chartplotting, with 10,000 waypoints
• Wireless integration with Minn Kota trolling motors and shallow water anchors, managed through the Minn Kota Fishing App
• AutoChart Live with eight hours of built-in recording time
• Media Tool to capture screenshots and record sonar 30 seconds into the past or up to two minutes into the future
• Update software over Wi-Fi and push updates to networked gear
• Ethernet, NMEA 2000, Bluetooth and Wi-Fi connectivity
• Transom mount transducer included

Who Is This Product For?

• Anglers who want a compact, high-resolution 10-inch display for sonar and charts.
• Minn Kota trolling motor owners who want their fish finder to control the motor and shallow water anchors.
• Boaters building a networked system with Live Sonar, radar or NMEA 2000 devices.
• Anglers who want to map their own lakes with AutoChart Live and manage waypoints from an app.

Why Buy From Us?

A fish finder is a major purchase, so we put everything you need to compare in one place: the model and part number, included transducer, what's in the box, connections, power requirements and full sonar specifications. Check it against your boat and your other gear, order with confidence, and get set up for the next trip. The manufacturer's warranty is also listed below.

Product Details

Model and Warranty

• Model: Minn Kota X10 CMSI+ VX (Part No. 412380-1VX)
• Screen size: 10"
• Touchscreen: Yes
• Cartography brand: Humminbird/Navionics
• Included transducer: XM-14-HW-CMSI-T transom mount transducer (included: yes)
• Manufacturer's warranty: 2-year limited warranty, extended to a 3-year limited warranty with product registration

What's in the Box

• X10 CMSI+ display
• Power adapter
• Gimbal bracket
• Transom mount transducer

Display

• Display size (diagonal): 10"
• Dimensions with gimbal: 12.098" W x 7.702" H x 4.103" D
• Dimensions without gimbal: 12.098" W x 7.253" H x 3.625" D
• Pixel matrix: 1280 x 800
• Display type: Color TFT
• Colors: 24-bit
• HDMI compatible: No

Sonar

• Standard sonar: Dual Spectrum CHIRP, MEGA Down Imaging+, MEGA Side Imaging+
• Sonar coverage: 20°, 42°, 60° and (2) 86° at -10 dB
• Optional sonar: 50/83/200 kHz, Airmar High, High Wide, Medium, Medium Wide and Low
• CHIRP frequencies supported: Full Mode (150-220 kHz), Narrow Mode (180-240 kHz), Wide Mode (140-200 kHz)
• Sonar frequencies supported: 50/83/200/455/800 kHz, HW DSC CHIRP and MEGA
• Sonar depth: 600 ft (standard transducer); 3,500 ft (optional Airmar CHIRP)
• Imaging frequencies supported: 455 kHz DI+ (420-520 kHz), Compact MEGA DI+ (1125-1225 kHz), 455 kHz SI+ (405-505 kHz), Compact MEGA SI+ (1100-1200 kHz)
• Down Imaging depth: 400 ft (455 kHz), 200 ft (MEGA)
• Side Imaging range (side to side): 800 ft (455 kHz), 400 ft (MEGA)
• Temperature: built-in, with temperature alarm (no temperature graph)
• Speed: included

Navigation and Features

• GPS receiver: internal
• GPS chartplotting and trackplotting: included
• Waypoints / routes / tracks (points): 10,000 / 50 / 50 (20,000)
• Screen snapshot and sonar recording: included
• Custom digital readouts and view selections: yes
• View preset keys and X-Press menu system: yes
• In-dash installation: if in-dash mounted, an external GPS antenna is required (sold separately)

Power and Technical

• Memory card slot: dual micro SD
• Power input: 10.8-20 VDC
• Power draw: 2.2 A
• Power output: 8,000 W peak-to-peak, 1,000 W RMS

Connectivity and Compatibility

• Connections: NMEA 2000, Bluetooth, Ethernet, Wi-Fi
• Minn Kota Talon shallow water anchors: compatible
• Radar: compatible
• 5-port Ethernet switch: compatible
• Autopilot: compatible
• AIS: optional
• GPS heading sensor: compatible via NMEA 2000, not compatible via NMEA 0183
• Live Sonar: compatible (sold separately)
• Minn Kota Maps Premium: compatible (optional)

Frequently Asked Questions

What is the Minn Kota X10 CMSI+ VX?

It is a 10-inch touchscreen GPS/fishfinder with Dual Spectrum CHIRP, MEGA Side Imaging+ and MEGA Down Imaging+, supplied with an XM-14-HW-CMSI-T transom mount transducer. It integrates with compatible Minn Kota trolling motors and shallow water anchors.

Is a transducer included?

Yes. The XM-14-HW-CMSI-T transom mount transducer is included.

What comes in the box?

The X10 CMSI+ display, a power adapter, a gimbal bracket and the transom mount transducer.

Does it work with Live Sonar?

Yes. It is compatible with Live Sonar in Forward, Down or Landscape mode. Live Sonar is sold separately.

Can it control my Minn Kota trolling motor and shallow water anchors?

Yes, with compatible Minn Kota gear. The display works with Minn Kota trolling motors and Talon shallow water anchors, and the Minn Kota Fishing App lets you manage your boat, waypoints, trolling motor and anchors wirelessly. Check your motor's compatibility before ordering.

How deep and how far does the sonar reach?

Sonar depth is 600 ft with the standard transducer, or 3,500 ft with the optional Airmar CHIRP. Down Imaging reaches 400 ft (455 kHz) and 200 ft (MEGA). Side Imaging covers 800 ft (455 kHz) and 400 ft (MEGA) side to side.

Does it have HDMI, and what other connections does it offer?

It does not have HDMI. It offers NMEA 2000, Ethernet, Bluetooth and Wi-Fi, plus a dual micro SD card slot.

Do I need anything extra to mount it in a dash?

Yes. If you mount it in-dash, an external GPS antenna is required for accurate positioning and navigation. It is sold separately.

What warranty does it have?

The manufacturer provides a 2-year limited warranty, extended to a 3-year limited warranty with product registration.